PLC-ANALYZER
pro
5
System Requirements:
Intel® Pentium® Processor
Microsoft® Windows
9x/NT/2000/XP
128 MB RAM
Graphic adaptor 800 x 600 pixel
CLICK TO VIEW PRICE SHEET
Diagnostic For Process Automation & PLC Control Technology
Failure diagnosiss
Long term recording
Cycle-time optimization
Installation/Service
System documentation
Training
External measured values via USB
PLC Logic analysis in no time!
-
Allen Bradley
-
Bosch
-
GE Fanuc
-
Modicon
-
Omron
-
Schneider
-
Siemens
PLC-ANALYZER pro 5
is a software system for logic analysis and acquisition of recorded
data on PLC controlled facilities. Acquisition, representation, and
evaluation of PLC signals such as inputs, outputs, flags, data
words, etc. is now very easy. Online display makes possible
observation of the signal waveform in real time. In addition to long
term recording, trigger conditions can be specified for the
acquisition of particular events. This allows rarely occurring
sporadic errors to be recorded for later analysis. In contrast to
traditional logic analyzers, the PLC-ANALYZER pro 5 has the
decisive advantage of recording process data through standardized
PLC interfaces (e.g. Modbus), or by an automation network (Modbus
Plus or Industrial Ethernet). A computer that is connected for the
purpose of programming the PLC can be used for recording process
data without any hardware modifications. The tiresome process of
hooking up monitoring cables is now a thing of the past.
Cycle-precise recording is attractive because of the complete
acquisition of measured values in each PLC cycle. By using the
measurement interface AD_USB-Box® external voltage and
current signals, which are not available in the PLC, can also be
recorded. Project files make it possible to automate frequently
recurring acquisition sessions for various facilities.
Together with the terraLink remote maintenance system, data can be
acquired at every PLC directly from PLC-ANALYZER pro 5 over the
public telephone network. For integration in a
switchgear case AUTEM offers the BLACKBOX
ultra-compact Mini-PC for long-term PLC process data recording.
PLC ANALYZER pro 5 is an indispensable tool for PLC software
development, construction, installation, technical service and
training. AUTEM offers an inexpensive licensing model
with primary and additional licenses for one or more than one
workstation.
PLC DRIVERS:
SIMATIC S7
MPI/PPI + PROFIBUS
SIMATIC S7
Industrial Ethernet TCP/IP
SIMATIC S5
SINUMERIK
FESTO
BOSCH CL
PILZ PSS
Allen Bradley Control Logix
PLC/SLC RS232/DH+/DH485
Allen Bradley Control Logix
Ethernet TCP/IP
GE Fanuc series 90/VersaMax/Nano/Micro
OMRON C/CV/CS1
MITSUBISHI MELSEC A+FX
Schneider TSX, Quantum/Modicon 984 Modbus Plus
Schneider TSX, Quantum/Modicon 984 Modbus TCP/IP
Schneider TSX, Quantum/Modicon 984 Modbus
Schneider TSX Premium/Micro/Nano XWAY TCP/IP
Schneider AEG TSX A250/A120
Beckoff Twincat I/O
AD_USB-Box |
Utilizes Existing PLC Connection to
Communicate!
Logic Analysis
-
System Analysis
-
Failure Diagnosis
-
Facility optimization
-
Signal file comparison
-
Data acquisition
Fields Of Applications
-
Failure diagnosis in PLC
systems
-
Detecting and localizing of
sporadic errors
-
Analysis and
optimization/cycle time reduction
-
Long tern recording of
measured values
-
Documentation & support of
QA,TPM/OEE
-
Installation, maintenance and
construction
PLC Logic analysis in no time!
Technical Features:
· Data acquisition through the programming unit interface of the
PLC, or through the automation network.
· Acquisition of input, output, flag, counter, timer, data word,
data block, etc.
· Signal display in bit, byte, word and double-word formats.
· Creating of pseudo signals.
· Adding of additional addresses or trigger conditions while
recording.
· Simultaneous acquisition on several PLC systems.
· Software solution, no additional hardware necessary.
· Modification of PLC program not necessary
· Cycle precise acquisition for SIMATIC-PLCs.
· Storage of the signal waveform on hard disk.
· Trigger-controlled signal file creation or long-term recording.
· Time controlled signal recording.
· Online signal display.
· Comfortable definition of triggers by Drag & Drop.
· Substantial trigger features with AND/OR logic and cascading.
· Pretrigger and Post trigger time can be set by user.
· Start and Stop trigger.
· Trigger on binary values and register values.
· Automatic alarm in case of trigger event (E-mail, sms or acoustic
announcement)
· Comparison of signals
· Search for trigger, edge, bit pattern, time and notices parallel
in more than one signal file.
· Measuring of periods of time and measuring of bits.
· Relative and absolute data time.
· Flexible register scaling and conversion to physical units.
· Use of symbolic address names and commentaries of the PLC
programming software.
· Project files for pre-configuring and automating data acquisition
runs.
· Print/storage of complete project settings for documentation or
test
sequence and measurements.
· S7-PLCSIM supporting
· Printing of signal files
· Export from signal files as image format, text or HTML file.
· Import of measured values in text format.
· Multilingual.
· AD-USB-Box®: Recording of external voltages and current signals
possible, connection via USB-port.
· BLACKBOX: ultra compact Mini-PC for installation in a switch
gear cabinet, long-term recording of measured values over several
years.
|
